Supplementary features
Reject
Exit
I Starting an Announcement
You want to address internal subscribers directly via their loudspeaker – where available – ,
without waiting for a reply (similar principle to that of an intercom system).
Requirement: It is essential that the internal subscriber has not barred his phone against
announcement (for configuration see the Chapter
Announcement/Forward", page 50).
Announcement
<Destination>
<Phone number>
26
Rejecting the call:
Foxmenu > Press
Reject
©
You remain connected with your first call partner. The call-waiting party
hears the busy tone.
Ending a current call:
Foxmenu > Press the
End call
©
1. The first call is terminated. You are now connected with the party who ini-
tiated the call waiting.
Pick up the handset.
Foxmenu > Press
Announcement
Select destination
(Subscriber
Enter the phone number and confirm with the
Subscriber is made aware of the announcement by an acoustic signal. The
©
display reads
Announcement:
Note:
You can also search in the phone book, last-number redial list or call list for the
phone number of the person you are looking for.
Or:
• Press Foxmenu > Foxkey Menu.
• Scroll to
Call features
• Press Announcement, select destination, and confirm
The display shows the number of the phone from which you last picked
©
up a call.
• Confirm
Ok
with the Foxkey or pick up the handset.
©
Subscriber is made aware of the announcement by an acoustic signal. The
display reads
Announcement:
Foxkey or End key.
Foxkey.
"Do not disturb/Call waiting/Intrusion/
Foxkey.
or Group) and confirm
You can now talk.
and press the Foxkey.
You can now talk.
Ok
with the Foxkey.
Ok
Foxkey.
Ok
with the Foxkey.