Forwarding To A Message - Aastra A150 User Manual

Supplementary features
I Forwarding to a message
You cannot be reached on your phone. You want any internal subscriber who calls you to get a
message. The subscriber hears the busy tone and obtains a message on his display.
Requirement: The internal subscriber must have a phone capable of receiving messages. Sub-
scribers whose phone cannot receive messages are put through to your phone or rerouted to a
destination predefined within the system.
You can use one of the text messages stored in the system directly, modify it or create a new
message.
Menu
Forwarding
Call Forwarding Uncon-
ditional
Message
<Message>
<Text>
I Locking Your Phone
You need to leave your desk and want to ensure that no-one can alter your phone's settings,
look at your private data, or make outside calls from your phone.
You can lock your phone with a PIN consisting of two to ten digits. You can modify this via menu
(see chapter "Changing the
cedures as of I7.1").
34
Press Foxmenu, then the Foxkey.
Scroll to Forwarding and press the
Scroll to Call Forwarding
Scroll to Message and confirm
Select one of the text messages stored in the system and press
Adapt or expand the text and confirm
© Forwarding to message is activated.
Note:
If you activate another call forwarding unconditional, the message you have
left on your phone will be deactivated.
PIN", page 49) or with */# procedure *47 (see "User's Guide */# Pro-
Select Foxkey.
and confirm Ok with the Foxkey.
Ok with the Foxkey.
Ok with the Foxkey.
Select Foxkey.