Shipping, Handling And Unpacking; General Warnings; Environment Conditions Of The Installation Site - corob D600 extra User Manual

4

SHIPPING, HANDLING AND UNPACKING

4.1

General warnings

DANGER
To avoid personal injuries and property damage, use the utmost care and caution when handling the machine,
and carefully follow the instructions given in this chapter.
Do not insert the forks of the lift truck into the long side to lift the packing.
The packing must be handled only by skilled personnel using appropriate handling equipment.
7261112675
4.2

Environment conditions of the installation site

Environment requirements for the site where the machine is to be used:
• Clean and dust-free.
• With level and stable floor.
• Fitted with a grounded power supply socket.
• Equipped with sufficient lighting to ensure good visibility from every point of the machine.
• Ventilated to prevent the concentration of harmful fumes.
• Temperature between 10 °C (50 °F) and 40 °C (104 °F) and relative humidity between 5% and 85%,
without condensation.
WARNING
The environment working conditions are strictly related to the type of colorants used (ask for information
from the paint manufacturer). The requirements indicated above are valid for the machine only.
Do not place the machine near heat sources or in direct sunlight. Also humidity sources should be avoided.
The machine must be used indoors only.
Environment conditions outside the values indicated (chapter 8.1) may cause serious damage to the machine,
especially the electronic equipment.
SHIPPING, HANDLING AND UNPACKING - 15
F R O
N T S
I D E
26 74
11
72 61
7261 1126
75
Figure 4
COROB™ D600 - D700 - D800 EXTRA
7261112674