Alerts and Warning During Measurement
Overload Alert
WARN IN G
Input Warning
Agilent U1251B/U1252B User's and Service Guide
For your safety, look out for this alert. When you are alerted,
immediately remove the test leads from the measuring source.
The meter provides an overload alert for voltage measurement
in both auto and manual range modes. The meter beeps
periodically once the measuring voltage exceeds 1010 V. For
your safety, please be aware of this alert.
The meter sounds an alert beep when the test lead is
inserted into the A input terminal but the rotary switch is
not set to the corresponding mA.A location. The primary
display indicates a flashing "A- Err" until the test lead is
removed from the A input terminal. See
Figure 2-13 Input terminal warning
Making Measurements 2
Figure 2-
13.
43