Kyocera FS-3040MFP+ Service Manual page 253

Adjusting the DP center line (alternative command for the maintenance mode U072)
Description
Adjusts the scanning center line for the DP original.
Purpose
Make the adjustment if there is a regular error between the centers of the original and the copy image when
the DP is used.
!R! KCFG "SCAN",3, #1,#2;EXIT;
Format
#1 1: FRONT Center line (first page)
Parameter
2: BACK Center line (second page)
3: ROTATE Center line (rotated scan)
#2 Setting range: -39 to 39 (in 0.086mm increment) (initial: 0)
Example: FRONT set to 15, BACK set to 3
!R! KCFG "SCAN",3,1,15; KCFG "SCAN",3,2,3;EXIT;
DP center line
Original Copy Copy
example 1 example 2
2-4-19
2MF/2MG