Irqs Activity Monitoring - Acorp 7KT333 User Manual

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1

IRQs Activity Monitoring

When set to On(default), any event occurring at Primary
INTR will awaken a system which has been powered
down.
The following is a list of IRQ, Interrupt ReQuests, which
can be exempted much as the COM ports and LPT ports
above can. When an I/O device wants to gain the attention
of the operating system, it signals this by causing an IRQ
to occur. When the operating system is ready to respond
to the request, it interrupts itself and performs the service.
As above, the choices are On and Off. Off is the default.
When set On, activity will neither prevent the system from
going into a power management mode nor awaken it.
IRQ3
IRQ4
IRQ5
IRQ6
IRQ7
IRQ8
IRQ9
IRQ10
IRQ11
IRQ12
IRQ13
IRQ14
IRQ15
(COM1)
(COM2)
(LPT2)
(Floppy Disk)
(LPT1)
(RTC Alarm)
(IRQ2 Redir)
(Reserved)
(Reserved)
(PS/2 Mouse)
(Coprocessor)
(Hard Disk)
(Reserved)
1 - 2 0 1 - 2 0 1 - 2 0
1 - 2 0 1 - 2 0
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp