Reset Configuration Data; Resources Controlled By - Acorp 7KT333 User Manual

Table of Contents

Bhapter 1

Reset Configuration Data

The system BIOS supports the PnP feature so the system

needs to record which resource is assigned and proceeds

resources from conflict. Every peripheral device has a

node, which is called ESCD. This node records which

resources are assigned to it. The system needs to record

and update ESCD to the memory locations. These

locations (4K) are reserved at the system BIOS.

If Disabled (Default)is chosen, the system's ESCD will

update only when the new configuration varies from the

last one. If Enabled is chosen, the system is forced to

update ESCDs and then is automatically set to the

"Disabled" mode.

IRQ3

IRQ4

IRQ5

IRQ6

IRQ7

IRQ8

IRQ9

IRQ10

IRQ11

IRQ12

IRQ13

IRQ14

IRQ15

By Choosing "Auto" (default), the system BIOS will detect

the system resources and automatically assign the relative

IRQ and DMA channel for each peripheral. By Choosing

"Manual" the user will need to assign IRQ & DMA for

add-on cards. Be sure that there are no IRQ/DMA and I/O

port conflicts.

assigned to: PCI PnP

1 - 2 1

BIOS Settp

Table of Contents