Acorp 7KT333 User Manual page 37

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1
First/Secondary/Third Boot Device
This BIOS attempts to load the operating system from
the devices in the sequence selected in these items.
The Choices: Floppy, LS120, HDD-0, SCSI, CDROM,
HDD-1, HDD-2, HDD-3, ZIP100, LAN, Disabled.
Boot Other Device
The Choices: Enabled(default), Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the
logical drive name assignments.
The Choices: Disabled(default), Enabled.
Boot Up Floppy Seek
Seek disk drives during boot up. Disabled speeds boot-up.
The Choices: Enabled(default), Disabled.
Boot Up NumLock Status
Select power on state for Numlock.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control
Gate A20.
Normal
Fast (default)
Typematic Rate Setting
Enabled
Disabled (default)
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard
controller controls Gate A20.
Lets chipset control Gate A20.
Enabled this option to adjust
the keystroke repeat rate.
Disabled.
1 - 1 1 1 - 1 1 1 - 1 1
1 - 1 1 1 - 1 1
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp