Onboard Parallel Port - Acorp 7KT333 User Manual

Table of Contents

Bhapter 1

Onboard Serial Port1

Select an address and corresponding interrupt for the first

and second serial ports.

The Choices: 3F8/IRQ4(default), 2F8/IRQ3, 3E8/IRQ4,

2E8/IRQ3, Auto, Disabled.

Onboard Serial Port 2

Auto

3F8/IRQ4

2F8/IRQ3 (default)

3E8/IRQ4

2E8/IRQ3

Disabled

UART Mode Select

This item allows you to select which Infra Red(IR)

function of the onboard I/O chip you wish to use.

The Choices: Normal(default), IrDA, SCR, ASKIR.

UR2 Duplex Mode

This item allows you to select which Infra Red(IR)

function of the onboard I/O chip you wish to use.

The Choices: Half(default), Full.

Onboard Parallel Port

This item allows you to select the I/O address with which

to access the onboard parallel port controller.

The Choices: 378/IRQ7(default), Disabled, 278/IRQ5,

3BC/IRQ7.

BIOS will automatically setup

the Serial Port 2 address.

Enabled onboard Serial Port 2

and address is 3F8.

Enabled onboard Serial Port 2

and address is 2F8.

Enabled onboard Serial

Port2 and address is 3E8.

Enabled onboard Serial

Port2 and address is 2E8.

Disabled.

1 - 1 2

BIOS Settp

Table of Contents