Acorp 7KT333 User Manual page 11

Chaosdr 1 Chaosdr 1 Chaosdr 1 Chaosdr 1 Chaosdr 1
1.6 DDR SDRAM Installtion
The motherboard supports a maximized 3GB memory. It provides
three 184-pin unbuffered DDR sockets. It supports 64MB to 1GB
DDR memory module.
DDR SDRAM Access Time: 2.5V Unbuffered PC1600/PC2100/
PC2700 Type required.
DDR SDRAM Type: 64MB, 128MB, 256MB, 512MB, 1GB DDR
Module. (184 pin)
DDR SDRAM Installation Procedures:
1. The DDR socket has a "Plastic Safety Tab" and the DDR
memory module has an asymmetrical notch", so the
DDR memory module can only fit into the slot in one
direction.
2. Push the tabs out. Insert the DDR memory modules
into the socket at a 90-degree angle then push down
vertically to fit onto place.
3. The Mounting Holes and plastic tabs should fit over the
edge and hold the DDR memory modules in place.
Note:
1. When you plug or unplug DDR module, you must check
your power supply is off.
2. When using DDR 333MHz memory, please make sure
the CPU Front Side Bus frequency is 266MHz.
80 pins
1 - 8 1 - 8
1 - 8 1 - 8 1 - 8
Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn
104 pins