Specifications; Mfs-2000 Multi Format Switcher Processor - Sony MFS-2000-C Operation Manual

Specifications

The following specifications show the reference
performance for this unit and individual option boards/
units.
Design and specifications are subject to change without
notice.
MFS-2000 Multi Format Switcher
Processor
General
Power requirements
100 to 240 V AC, 50/60 Hz
Power consumption
100 V: 4.5 A, 240 V: 2.1 A
Peak inrush current
(1) Power ON, current probe method:
12 A (100 V), 33 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1: 22 A
(230 V)
Operating temperature
5ºC to 40ºC (41ºF to 104ºF)
Performance guaranteed temperature
10ºC to 35ºC (50ºF to 95ºF)
Storage temperature
−20ºC to +60ºC (−4ºF to +140ºF)
Operating humidity
10% to 90%
Dimensions (w/h/d, excluding projections)
482×132.4×520 mm
1
(19×5 /
4
Mass Approx. 22 kg (48 lb 8 oz)
(when equipped with all installable
option boards and option power supply
unit)
Input
Inputs 8 (BNC type)
Signal format SMPTE292M/SMPTE259M-C
Signal level 0.8 V p-p ±10%
Signal transfer rate
1.5 Gbps/270 Mbps
Return loss 15 dB
Cable length HDTV: 100 m (5C-FB cable,
BELDEN1694 or equivalent)
SDTV: 200 m (5C-2V cable,
BELDEN8281 or equivalent)
1
×20 / inches)
2
Output
Outputs 4 (BNC type), each with 2 outputs
Signal format SMPTE292M/SMPTE259M-C
Signal level 0.8 V p-p ±10%
Signal transfer rate
1.5 Gbps/270 Mbps
Remote control connectors
CTRL RJ-45
Complies with 100Base-TX standard
DATA RJ-45
Complies with 100Base-TX standard
EDITOR, SERIAL TALLY
D-sub 9-pin, female
Comply with RS-422A standard
Data transfer rate: 38.4 Kbps
GPI D-sub 25-pin, female
TTL inputs: 8
Relay contact outputs: 4 (30 V AC/DC,
0.1 A)
Open collector outputs: 4
TALLY D-sub 25-pin, female
Relay contact outputs: 4 (30 V AC/DC,
0.1 A)
Open collector outputs: 4
TERMINAL D-sub 9-pin, female
Complies with RS-232C standard
Data transfer rate: 9600 bps
Reference input and output
IN BNC type, 75Ω with loop-through output
HDTV systems:
HD tri-level sync/SDTV analog black
burst/SDTV analog sync
SDTV systems:
Analog black burst/analog sync
OUT BNC type, 75Ω
HD tri-level sync (HDTV systems only)
Signal level 300 mV ±10%
Analog sync
Signal level 300 mV ±10%
Phase variation range
−90H to +90H
AC input
AC IN A, B, C
3-pin AC connector
Accessories supplied
75Ω terminator (1)
Operation Manual (1)
Installation Manual (1)
19
Specifications