Module Overview - Sony MFS-2000-C Operation Manual

Large volume data storage
The MFS-2000 is equipped with a hard disk for storage of
setting data and image data from switcher frame memory.
Data can also be stored on "Memory Stick" media.

Module Overview

MFS-2000 Multi-Format Switcher
Processor
This is the switcher main unit.
Depending on the connected panels, it functions as a 1 M/
E or 1.5 M/E switcher. It features 8 inputs and 4 outputs as
standard equipment.
The main unit alone functions as an SD only system.
MKS-2110M Input/Output Connector Board
An input/output expansion board. One board only can be
installed in the MFS-2000, to expand the MFS-2000 to 16
inputs and 8 outputs.
MKS-2440 Frame Memory Board Set
An option board set for frame memory.
One set only can be installed in the MFS-2000, to enable
use of frame memory functions.
However, when this option only is installed, frame
memory functions are limited to SD.
MKS-2420M Color Corrector Board
An option board set for 2-channel color correction.
One set only can be installed in the MKS-2440, to enable
use of color correction functions.
To use this option also requires the MKS-2440.
MKS-2470 DME Board Set
An option board set for 2-channel DME. One set only can
be installed in the MFS-2000, to enable use of DME
effects.
However, when this option only is installed, DME effects
are limited to SD.
BZS-2000M Switcher Upgrade Software
Option software to upgrade the MFS-2000 to HD/SD
multi-format capability.
Installation of this software gives the MFS-2000 the ability
to handle both HD and SD formats.
BZS-2440M Frame Memory Upgrade
Software
Option software to upgrade the MKS-2440 to HD/SD
multi-format capability.
Installation of this software gives the MKS-2440 the
ability to handle both HD and SD formats.
BZS-2470M DME Upgrade Software
Option software to upgrade the MKS-2470 to HD/SD
multi-format capability.
Installation of this software gives the MKS-2470 the
ability to handle both HD and SD formats.
MKS-2010 1 M/E Control Panel
A 1 M/E control panel with 12 cross point buttons.
MKS-2015 1.5 M/E Control Panel
A 1.5 M/E control panel with 12 cross point buttons.
MKS-2017 1.5 M/E Wide Control Panel
A 1.5 M/E control panel with 20 cross point buttons.
HK-PSU02 Power Supply Unit
A backup power supply unit for the MFS-2000. The MFS-
2000 is equipped with 2 power supply units as standard
equipment. Installation of this option brings the number of
power supply units to 3, allowing normal operation even if
one of the power supply units fails.
HK-PSU11 Power Supply Unit
A backup power supply unit for the MKS-2010/2015/
2017. The MKS-2010/2015/2017 is equipped with 1
power supply unit as standard equipment. Installation of
this option brings the number of power supply units to 2,
allowing normal operation even if one of the power supply
units fails.
7
Overview