Installing The Cameras - Uniden GSHC1000 Series Owner's Manual

Installing the Cameras

App Cam 24
1. Hold the base of the camera stand where you
want to mount it and mark the location of the
screw holes.
2. Use the included screws and anchors to attach
the base to the wall or ceiling. You can also
attach the base into a flat surface such as a
tabletop if needed.
3. Before attaching the camera, tug gently on the
stand to make sure it is securely in place.
4. Disconnect power to the camera.
5. Attach the camera to the mounting screw. Set
the mounting post to the correct angle (up to
90° movement). Tighten the circular camera
brace up against the App Cam 24 to secure it
into place.
6. After installation, reconnect power.
App Cam 26
1. Hold the mounting plate where
you want to mount it and mark the
location of the screw holes.
2. Use the included screws and
anchors to attach the mounting
plate to the wall.
3. Use the enclosed screws to screw
the camera to the bracket.
App Cam 25
1. Hold the base of the camera
stand where you want to mount it and
mark the location of the screw holes.
2. Use the included screws and anchors
to attach the base to the wall or
ceiling. You can also screw the base
into a flat surface such as a tabletop
if needed.
3. Before attaching the camera, tug
gently on the stand to make sure it is
securely in place.
Camera Brace
19