Uniden GSHC1000 Series Owner's Manual page 29

ONE-TOUCH Scenarios
With the One-Touch scenario, you can choose to arm the sensors/devices
on the system, start camera recording or set off the Indoor Siren along with
camera recording.
Ideally, One-Touch scenarios can be used to secure your home when you
plan to be away.
1. From the Scenario screen, tap
touch scenario icons display an edit icon
2. Tap on the ARM icon. The Scenario Setup screen displays the sensors
and devices on your system. The system defaults to status = ON (check
mark) for all sensors.
3. If you do not want to include a specific sensor in the one-touch ARM or
PARTIAL ARM scenario, tap the check mark on the sensor to turn it off.
4. When you have set up your One-Touch ARM or PARTIAL ARM scenario,
tap . The Scenario main screen displays again.
5. Tap on the Camera icon. The Scenario Setup screen displays the
cameras on your system. Tap the specific camera to turn it on.
6. When you have set up your One-Touch Camera scenario, tap
Scenario main screen displays again.
7. Tap on the Panic icon. The Scenario Setup screen displays the cameras
and the Indoor Siren on your system. The Indoor Siren is turned ON by
default. Tap the specific camera to turn it on.
8. When you have set up your One-Touch Panic scenario, tap
Scenario main screen displays again.
Door Sensor
Window
Book room
to enter Edit mode. The available one-
.
. The
. The
29