Uniden GSHC1000 Series Owner's Manual page 22

Motion/PIR Sensor
1. Select Motion/PIR Sensor from the Select
Device screen, by tapping the arrow ( )
next to it.
2. Tap to initiate the pairing process and
then press the 'pairing' button located
inside the battery compartment.
3. Enter the 'Device Name', 'Location' and tap
to complete the pairing process.
4. The newly paired sensor will now display in
the App's 'Status' section.
5. Repeat this procedure for each of the
Motion/PIR Sensors.
Install the Motion/PIR Sensor
16 meters
22
(A) Using Adhesive Tape
(B) Using Wall-Mount Bracket
1. After the Motion/PIR Sensors
are paired to the Gateway
through the App, apply the
adhesive pads to the back of
the sensor.
OR
2. Fix the bracket on the back of
the Motion Sensor and then
using the screws mount it on
a wall.
The detection distance is up
to 16m.