Using The Intercom; Pairing Accessory Cameras - Uniden G1410 Owner's Manual

Using the Intercom

The Intercom feature lets you talk to whomever is within camera range.
1. Make the camera you want to establish an intercom link with the full screen live
view camera.
2. Press and hold Press and hold
3. Speak clearly into the microphone.
4. Release Release to listen to the response. to listen to the response.

Pairing Accessory Cameras

The two cameras that come with your G14 Series are paired to your monitor at the
factory. If you add cameras, install them and then pair the camera to the monitor.
1. Press MENU/OK to bring up the System Menu screen.
2. Select the Camera option.
3. Select Pair and then press MENU/OK. The Pair screen displays. The pairing
function assigns each camera to a different channel on the wireless monitor (up
to 4 cameras), and is necessary for configuring additional cameras.
4. Select the channel you want to pair the camera to and press MENU/OK. The
Press Pair Key message screen displays.
5. Within 30 seconds, press the Pair button located on the camera. Once the
camera pairs to the monitor, you can view the camera transmissions on the
monitor.
30
on the monitor. on the monitor.