Activate The Sensors; Connect The Indoor Siren - Uniden GSHC1000 Series Owner's Manual

Step 4: Activate The Sensors
PLEASE NOTE: For your convenience, we have pre-paired the sensors
(Remote Key, Door/Window Sensor, Motion/PIR Sensor) to the Gateway.
Please take off the insulating plastic tag on the sensors to activate them.
Please refer to the images below.
Motion/PIR Sensor
Door/Window Sensor Remote Key
However, if you encounter problems with any of the sensors/devices or if
you purchase additional sensors/devices, please refer to the manual pairing
instructions to pair the relevant sensor to the Gateway (Refer page 17).
Step 5: Connect The Indoor Siren
PLEASE NOTE: For your convenience, we have pre-paired the Indoor
Siren to the Gateway.
Please connect the Indoor Siren to the power outlet using the supplied AC
adaptor or insert 4 x AA batteries into the battery compartment to power up
the Siren.
OR
However, if you encounter problems with the Indoor Siren or if you purchase
an additional Indoor Siren, refer to the manual pairing instructions.
14