Uniden GSHC1000 Series Owner's Manual page 28

Scenarios
Scenarios can be best defined as a series of preset sensor actions triggered
by an event. The GuardianHome App allows you to set up scenarios, using a
combination of all the sensors/devices, to alert you in case of any event.
When you tap Scenario
divided into two sections along with a set of icons at the bottom.
If...Then
Scenarios
The top section, is what we will refer to as, One-Touch scenario. In this
section, you can set up specific sensors by just tapping on the relevant icon.
Let's take a look at the different options available under the One-Touch
scenario.
ARM: You can choose to arm, or partially arm selected device(s) and
sensor(s). When you arm the system, the Gateway beeps and a 30 second
countdown screen displays. After 30 seconds, a confirmation message,
"System is now armed', displays on the screen. Only after you have armed the
system you will be able to receive Email Alert/Push Notification.
CAMERA: Tap to activate selected camera(s) for sudden recording
requirements.
PANIC: Activate selected camera(s) or Indoor Siren(s) for emergency
recording or to sound an alarm.
The bottom section contains, what we will refer to as, If...Then scenarios.
If...Then scenarios activate a sequence of events when a specified sensor
is triggered. For example, we can set up the scenario in such a manner that
when the Motion/PIR Sensor detects motion, the camera will record and the
Indoor Siren will sound the alarm.
28
, the Scenario screen displays. The screen is
One-Touch
Scenarios
Icon Bar