Power Up The Camera; Pairing Accessory Cameras To The Monitor - Uniden G17xx Series Instructions Manual

Power Up the Camera

1. Connect one end of an AC adaptor to the camera's power
pigtail and plug the other end into a 240 volt AC (standard
indoor) power outlet. (If necessary, connect the extension
cord to the camera's pigtail and connect the AC adaptor to
the extension cord.)
Be sure the power plug and the connector are tightly twisted
together to avoid water leaking in.
2. Make sure the Power status light turns on. If it doesn't, try
reconnecting the AC adaptor, and make sure the power outlet
isn't controlled by a wall switch.

Pairing Accessory Cameras to the Monitor

To pair the camera to the G17xx Series monitor, follow the steps
below.
1. Press M and access the main menu. Then select Camera
Setup and press
assign to the new camera. Press
CH+
2. Press to scroll to the pairing option. Press
camera.
3. Within 30 seconds, press the
camera's power cord.
For more details on the G17xx Surveillance System, please
refer to the G17xx Series Owner's Manual.
6
M
. Scroll to the camera number you want to
M
PAIrING
Pairing Button
.
M
to pair the
button on the