Router Mode - D-Link DWM-312 User Manual

Section 4 - Con guration
Select NAT or Classical. The Classical option disables the NAT
NAT:
rewall.
Select Enable to enable WAN keep alive. This may be useful if your
Enable:
provider automatically disconnects you after an idle period.
Specify the method for keep-alive. Choose between DNS Query
DNS Query /
or ICMP Checking.
ICMP Checking:
This option cannot be changed.
Check Incoming/
Outgoing
packet:
Select either 60 seconds or 120 seconds to set the interval at
Check interval:
which the router will check for a connection.
The Failure Threshold speci es the number of retries before the
Fail Threshold:
WAN is assumed to be down.
Specify a target of the DNS queries or ICMP checks. Options
Target 1:
include DNS1, DNS2, Gateway, NTP Server which automatically
use this information from other settings, or your can manually
specify an address after selecting Other Host. The default is
DNS1.
In addition to the options available for Target1, you can also
Target 2:
select None to use only the host selected in Target1.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

Router Mode

19