Internet Connection Setup; Static Ip (Assigned By Isp) - D-Link DIR-605L User Manual

Section 3 - Configuration
Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet
mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this
format. Click Save.Settings to apply them.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the subnet mask assigned by your ISP.
Default Gateway:
Enter the gateway assigned by your ISP.
MAC Address:
The default MAC address is set to the WAN's physical
interface MAC address on the broadband router. It is not
recommended that you change the default MAC address
unless required by your ISP.
You can use the Copy.Your.PC's.MAC.Address button to
copy the MAC address of the Ethernet card installed by your
ISP and replace the WAN MAC address with the MAC address
of the router. It is not recommended that you change the
default MAC address unless required by your ISP.
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Address:
Secondary DNS
Enter an optional secondary DNS address.
Address:
MTU: Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1492
is the default MTU.
D-Link DIR-605L User Manual

Internet Connection Setup

Static IP (assigned by ISP)

14