Static (Assigned By Isp) - D-Link DIR-840 User Manual

Section 3 - Setup
Select Static IP if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway
address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four
octets separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this format.
Select Static.IP to manually enter the IP settings supplied
My Internet
Connection Is: by your ISP.
Auto-Backup: Check the box to enable a backup connection.
Internet Host: If you enabled Auto-Backup, enter the IP address of the
backup connection.
IP Address: Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the subnet mask assigned by your ISP.
Default Gateway:
Enter the gateway assigned by your ISP.
DNS Servers:
The DNS server information will be supplied by your ISP
(Internet Service Provider.)
MTU: Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1500
is the default MTU.
MAC Address: The default MAC address is set to the Internet port's physical
interface MAC address on the broadband router. It is not
recommended that you change the default MAC address
unless required by your ISP. You can use the Clone.Your.
PC's. MAC. Address button to replace the Internet port's
MAC address with the MAC address of your Ethernet card.
D-Link DIR-840 User Manual

Static (assigned by ISP)

21