Function Specifications; Operating Environment; Supported Oss (In Sas Environments); Table 2.3 Eternus Dx500 S3/Dx600 S3 Function Specifications - Fujitsu ETERNUS DX500 S3 Overview

Chapter 2 Specifications
2.2

Function Specifications

2.2 Function Specifications
This section contains the specifications of the functions for the ETERNUS DX.

Table 2.3 ETERNUS DX500 S3/DX600 S3 Function Specifications

Item
Supported RAID levels
RAID groups
Volumes
File system (NAS)
Number of connectable SAN
hosts (HBAs) (max.)
*1: Use of RAID0 is not recommended because it is not redundant. For RAID0 configurations, data may be
lost due to the failure of a single drive.
*2: Fujitsu original RAID level that provides the high speed rebuild function, and striping with double dis-
tributed parity.
*3: The maximum number of RAID groups that can be registered (for the RAID1 configuration).
2.3

Operating Environment

This section explains the operating environment that is required for the ETERNUS DX operation.
2.3.1

Supported OSs (in SAS Environments)

Servers and OSs that are supported by the ETERNUS DX as a SAN host are shown below.
For details on servers, Host Bus Adapters (HBAs), and driver software combined, refer to "Configuration Guide
-Server Connection-".
Number of RAID groups (max.) (*3)
Number of volumes per RAID group
Number of volumes (max.)
Volume capacity (max.)
File system capacity per ETERNUS DX (max.) 384TB
per storage system
per port
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Overview
Copyright 2015 FUJITSU LIMITED
ETERNUS DX500 S3
0 (*1), 1, 1+0, 5, 5+0, 6, 6-FR (*2)
264
128
16,384
128TB
1,024
256
23
ETERNUS DX600 S3
528
768TB
P3AM-7702-14ENZ0