Operation Of Your Blood Pressure Monitor; Inserting The Batteries - Microlife BP3AQ1 Instruction Booklet

b) Upper arm cuffs:
The cuff is for arm circumference 22–32 cm or
9.5" - 13.25" (included)
Microlife sells a large cuff for arm circumference 32-42 cm or
12" - 16" (call 1-800-568-4147 or visit
www.microlifeusa.com)
Please Note:
Do not force cuff connection into the
opening. Make sure the cuff connection is
not pushed into the AC adapter port. If the
cuff is too small, call toll free 1-800-568-4147
for further information.

4. Operation of your blood pressure monitor

4.1. Inserting the batteries

After you have unpacked your device insert the batteries. The battery compartment is located on the back
side of the device (see illustration).
a) Remove cover on the botton of the monitor.
b) Insert the batteries (4 x size AA 1,5 V), following the
indicated polarity. (+ -)
c) If the low battery indicator appears in the display, the
batteries are discharged and the unit will not function.
d) If the batteries are inserted incorrectly, the display
may function eratically or not at all. Check battery
polarity.
Attention!
• After the low battery indicator appears, the device
won't function until the batteries have been replaced.
• Please use "AA" Long-Life or Alkaline 1.5V Batteries.
• Do not use rechargable batteries.
• If the blood pressure monitor is not used for long
periods, remove the batteries from the device.
Functional check: Hold on the START button down to
test all the display elements. When functioning correctly
many icons will appear.
Low Battery Indicator
6