Mitel 6863i User Manual page 87

USING THE PAGING KEY
The following procedure describes the use of the Paging key on the IP phone. The procedure
assumes you have already configured the Paging key using the Mitel Web UI.
Notes:
1. The recipient of a Paging call can set a global Do Not Disturb (DND) to ignore any
incoming pages.
2. For incoming Paging, the phone uses the Intercom configuration settings. The
incoming Page is dependant on the Allow Barge In parameter setting and the
Idling/On Call state.This option is only available if external Directory sources have
been configured by your Administrator.
IP PHONE UI
1. On the IP phone, press the key you configured for Paging.
2. The phone opens a multicast RTP session and an outgoing OR incoming phone screen
displays.
3. Press the Drop key to end the multicast RTP session and return to the idle screen.
Note: If you enable global DND on the phone, the incoming multicast RTP session
is dropped.
Line Keys and Programmable Keys
85