Mitel 6863i User Manual page 120

Mitel 6863i SIP Phone Release 4.0.0 SP1 User Guide
DND in Custom Mode
IP PHONE UI
1. Press the DND key on the phone. The screen displays a list of the accounts on the phone
and allows you to enable/disable a specific account or all accounts.
2. Use the 2 and 5 navigation keys to scroll through the accounts.
In the above example, account 1 has DND enabled as indicated by a check mark ().
Account 2 has DND disabled as indicated by an X. Items 3 and 4 allow you to disable or
enable DND on all accounts, respectively.
3. Use the 4 Change key to enable or disable DND for a specific account or to enable/disable
DND for all accounts.
After making the change, press 3 Done and then # Confirm to save the change. Pressing
0 Cancel cancels the attempted change.
CALL FORWARD CONFIGURATION
Call Forward (CFWD) on the IP phone allows incoming calls to be forwarded to another
destination.
On the 6863i, you can set CFWD on the phone-side for a specific account or for all accounts
on the phone. You can set three modes for CFWD using the Mitel Web UI at the path, Basic
Settings > Preferences > General > Call Forward Key Mode: Account (default), Phone, and
Custom. Call Forward behaves according to the mode you set.
You can configure CFWD using the Mitel Web UI at the path, Basic Settings > Account
Configuration, oryou can configure CFWD using the IP phone UI at the path, Options > Call
Forward.
Using the Mitel Web UI at the path, Operation > Programmable Keys, you can also configure
a CFWD key on the phone to use as a shortcut for accessing the CFWD menu on the phone.
The following describes the behavior for each CFWD mode:
• Account (default): The account mode allows you to configure CFWD on a per account basis.
Pressing a configured CFWD key applies to the account in focus.
118
1 DND
John Smith
Done Change
2 DND
J. Smith X
Done Change
Apply Changes
0Cancel
#Confirm
3 DND
All Off
Done Change
4 DND
All On
Done Change