Mitel 6863i SIP Phone Release 4.0.0 SP1 User Guide
USING HANDSFREE SPEAKERPHONE
The handsfree feature allows you to speak to someone without using the handset or headset.
Your phone must be in either the Speaker or Speaker/Headset audio mode. For more
information about setting the audio mode on your phone, see
IP PHONE UI
•
To dial using hands free, first press
•
To answer a call on your phone using handsfree, press
•
If you are in Speaker audio mode, lift the handset and press
handsfree and handset.
•
If you are in Speaker/Headset audio mode, press
headset.
•
When the handset is on hook, press
Note: When handsfree is on, the speaker light turns on.
USING A HEADSET
The 6863i accepts headsets through the modular RJ9 handset jack on the back of the phone.
Contact your telephone equipment retailer or distributor to purchase a compatible headset.
VOLUME CONTROLS FOR THE HEADSET MICROPHONE
On the 6863i, there are three options for the headset microphone volume: Low, Medium, and
High. For information about configuring the headset microphone volume, see
Volume"
on
page 34
MAKING AND RECEIVING CALLS USING A HEADSET
IP PHONE UI
1. Ensure that you have selected a headset audio mode (see
2. Plug in the headset into the handset jack.
3. Press the
audio mode selected from the Options List, a dial tone or an incoming call is received on
either the headset or the handsfree speakerphone.
4. Press the
90
.
key to obtain a dial tone or to answer an incoming call. Depending on the
key to end the call.
"Audio Mode"
and enter a number at the dial tone.
or the line/call appearance key.
to switch between handsfree and
to disconnect the call.
"Audio Mode"
on
page
33.
to switch between
"Headset Mic
on
page
33.