Remove The Air Baffle - HP ProLiant DL180 Gen9 User Manual

Primary PCI riser cage
o
Secondary PCI riser cage
o
Install the access panel (on page 26).
4.
Do one of the following:
5.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
6.

Remove the air baffle

CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
("Installing the server into the
For proper cooling, do not operate the server without the access panel, baffles,
rack" on page 36).
Operations 29