Install the storage controller. Verify that the board is firmly seated in the slot.
b.
For more information about the integrated storage controller and its features, select the relevant user
documentation on the HP website (http://www.hp.com/go/smartstorage/docs).
Connect the Mini-SAS cable to the storage controller.
c.
Install the air baffle (on page 30).
d.
Install the primary PCI riser cage
e.
Route the Mini-SAS cable along the side of the system board towards the front chassis, and then
f.
connect the cable to the drive backplane.
("Install the PCI riser
cages" on page 28).
Hardware options installation 58