Retaining The Recovery Key/Password - HP ProLiant DL180 Gen9 User Manual

Install the TPM board. Press down on the connector to seat the board
6.
page 14).
Install the TPM security rivet by pressing the rivet firmly into the system board.
7.
If removed, install the expansion board.
8.
Install the access panel (on page 26).
9.
Do one of the following:
10.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
11.

Retaining the recovery key/password

The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery
("Installing the server into the
("System board components" on
rack" on page 36).
Hardware options installation 111