HP ProLiant DL180 Gen9 User Manual page 100

Remove the server from the rack (on page 22).
o
Remove the access panel (on page 24).
4.
Remove the air baffle (on page 29).
5.
Remove the primary PCI riser cage
6.
If you already have an HP FlexibleLOM Adapter on hand, install the option in the FlexibleLOM riser
7.
cage:
Remove the cover opposite the FlexibleLOM riser slot.
a.
Install the FlexibleLOM adapter.
b.
Install the FlexibleLOM riser cage:
8.
Align the riser board with the corresponding connector on the system board, and then press down
a.
the FlexibleLOM riser cage.
("Remove the PCI riser cages" on page 26).
Hardware options installation 100