Adjusting Basic Position Of Foot Brake Lever - KTM 525 XC ATV EU Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Adjusting basic position of foot brake lever

9.39
Warning
Danger of accidents Brake system failure.
–
If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to over-
heating. Adjust free travel on foot brake lever according to specifications.
–
Disconnect spring
–
Move the foot brake lever backwards and forwards between the end stop and the foot
brake cylinder piston bracket and check free travel
Guideline
Free travel at foot brake lever
» If the free travel does not meet specifications:
–
Adjust the basic position of the foot brake lever.
–
Reconnect spring
601085-10
x
.

3... 5 mm (0.12... 0.2 in)
.

.

x ( p. 116)
116