Greasing The Rear Wheel Eccentric Element; Checking Brake Discs - KTM 525 XC ATV EU Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Greasing the rear wheel eccentric element

9.28

Checking brake discs

9.29
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
–
Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be glad to help.)
–
Use a grease gun to fill the rear wheel eccentric element via the grease nipple
grease emerges from the left shaft seal ring
Long-life grease (
601052-10
–
Check the thickness of the front and rear brake discs at several places on the disc to
see if it conforms to measurement
Info
Wear reduces the thickness of the brake disc around the area used by the brake
linings.
Brake discs - wear limit
Front
400362-10
Rear
.

p. 198)
.

3.5 mm (0.138 in)
3.5 mm (0.138 in)
105
until
