Chapter 7 - Working With Bluetooth And Nfc Technology; Bluetooth Technology; Turning The Bluetooth Radio On Or Off; Pairing And Trusted Devices - Honeywell Dolphin 75e User Manual

7
Working with Bluetooth and NFC Technology

Bluetooth Technology

Turning the Bluetooth Radio On or Off

Bluetooth™ is a short-range wireless communications technology used to exchanged data between devices over a
distance of approximately 26.2 feet (8 meters). Before you can connect or pair your terminal to another device using
Bluetooth technology, you must first turn on the Bluetooth radio.
1. Touch All Apps
2. Touch the Bluetooth OFF/ON toggle box
Once the Bluetooth radio is activated, the terminal automatically starts searching for discoverable devices.
Note: System bar icons at the top of the touchscreen indicate the status of the Bluetooth radio.

Pairing and Trusted Devices

The terminal supports pairing with other devices using Bluetooth technology. Pairing happens during general connection
setup. Paired devices are "trusted" devices. This means that there is unrestricted access to all services (including services
that require authorization and authentication).

Connecting to Other Bluetooth Devices

To connect to other Bluetooth devices, you need to perform a device search, select a discovered device, and then connect
to the selected device. Pairing happens as part of the connection process.
1. Make sure the Bluetooth device you are attempting to connect to is in range and set to be discoverable by other devices
using Bluetooth technology.
2. Touch All Apps
3. Touch Bluetooth.
4. Touch Search for Devices to refresh the scan started when the Bluetooth radio was first activated.
5. Touch on the name of the device you want to connect to on Available Devices list.
6. The Bluetooth radio attempts to connect with the device. If the device has a specific passcode, enter it when prompted.
Note: When attempting to connect to a printer or headset with Bluetooth capabilities, the passcode may default to either
1234 or 0000. If there is no default, consult the device literature for the number.
7. When the devices are paired successfully, the device name is displayed under the "Paired Devices" heading on the
Bluetooth settings screen.

Configuring or Unpairing Bluetooth Devices

1. Touch All Apps
2. Touch Bluetooth.
3. On the Paired Devices list touch the settings icon
4. Touch Rename, Unpair or select a different profile from the Profiles list available for the paired device.

Making the Terminal Discoverable

By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bluetooth
devices.
> Settings .
> Settings . Verify the Bluetooth radio is activated
> Settings . Verify the Bluetooth radio is activated
to turn the radio on
next to name of the device you want to disconnect.
.
.
.
7 - 1