Honeywell Dolphin 75e User Manual page 45

Check the box to
enable a symbology.
Imager Settings
The Override Recommended Values setting is disabled by default. The recommended Imager Settings are designed to
work in a wide range of environments and should not normally need to be modified.
Trigger Settings
Setting Description
Decode Timeout Scanning will automatically turn off after this number of seconds if the
scan trigger is held and nothing has successfully decoded.
Notification Settings
Setting Description
Good Read Enable or disable a good read notification.
Notification The notification includes a short green blink of the scan LED, a short beep
tied to the system volume, and optionally a short vibration.
Bad Read Enable or disable notification of a failed scan.
Notification The notification includes a short red blink of the scan LED, an error beep
tied to system volume, and optionally a short vibration.
Vibrate Enabled Enable or disable vibrate along with Good Read or Bad Read
notifications.
Touch the code type to access the
advanced symbology settings.
Default Value
20
Default Value
Enabled
Disabled
Disabled
3 - 5