Chapter 7 - Working With Bluetooth And Nfc Technology; Bluetooth Technology; Turning The Bluetooth Radio On Or Off; Pairing And Trusted Devices - Honeywell dolphin 75e User Manual

7
Working with Bluetooth and NFC Technology

Bluetooth Technology

Turning the Bluetooth Radio On or Off

Bluetooth™ is a short-range wireless communications technology used to exchanged data between devices over a
distance of approximately 26.2 feet (8 meters). Before you can connect or pair your terminal to another device using
Bluetooth technology, you must first turn on the Bluetooth radio.
1. Touch All Apps
2. Touch the Bluetooth switch button to turn the radio On
Once the Bluetooth radio is activated, the terminal automatically starts searching for discoverable devices. Any
discovered devices are listed on the screen.
Note: System bar icons at the top of the screen indicate the status of the Bluetooth radio.

Pairing and Trusted Devices

The terminal supports pairing with other devices using Bluetooth technology. Pairing happens during general connection
setup. Paired devices are "trusted" devices. This means that there is unrestricted access to all services (including services
that require authorization and authentication).

Connecting to Other Bluetooth Devices

To connect to other Bluetooth devices, you need to perform a device search, select a discovered device, and then connect
to the selected device. Pairing happens as part of the connection process.
1. Make sure the Bluetooth device you are attempting to connect to is in range and set to be discoverable by other devices
using Bluetooth technology.
2. Touch All Apps
3. Verify the Bluetooth radio is turned On
4. (Optional) If the device you want does not appear in the list, make sure the device is turned on and discoverable.
Touch and then select Refresh.
5. Touch on the name of the device you want to connect to on Available Devices list.
6. The Bluetooth radio attempts to connect with the device. If the device has a specific passcode or PIN, enter it when
prompted.
Note: When attempting to connect to a printer or headset with Bluetooth capabilities, the passcode may default to either
1234 or 0000. If there is no default, consult the device literature for the number.
7. When the device and 75e are paired successfully, the device name appears under the "Paired Devices" heading on the
Bluetooth screen.

Changing the 75e Bluetooth Name and Viewing Received file Statistics

1. Touch All Apps
2. Verify the Bluetooth radio is turned On
3. Touch the three dots
> Settings .
> Settings > Bluetooth.
.
> Settings > Bluetooth.
.
in the upper right corner of the screen.
.
7 - 1