Honeywell Dolphin 75e User Manual page 76

1. Verify NFC technology is enabled on both terminals.
2. Verify Android beam is enabled on the terminal sending the file.
3. Touch NFC Beam Demo
4. Check the box next to the test.txt file.
5. Hold the terminals back to back. The sending terminal emits a sound, the demo screen image shrinks, and the mes-
sage, "Touch to beam" displays.
Note: Both terminals must be unlocked for NFC detection. If sound is muted, the terminal vibrates when an NFC tag is
detected.
6. Touch the reduced screen image to initiate file transfer.
A "File received" message is displayed on the receiving terminal when the transfer is successful. By default, the file
is saved to the root Honeywell/nfcbeamdemo folder of the microSD card.
7. Select the Back button
7 - 6
from inside the NFC Demos
to exit the demo.
app on the sending terminal.