Adjusting The Sensitivity And Speed Of The Touch Panel Response; Backup & Reset; Honeywell Settings; Key Remapping - Honeywell Dolphin 75e User Manual

Hide thumbs Also See for Dolphin 75e:
Table of Contents

Advertisement

Configuring Text-to-Speech
To configure Text-to-speech (TTS) settings:
1. Touch All Apps
2. Select a preferred engine used for speech synthesis when you want to hear text read aloud.
3. Touch
next to the engine to change the engine settings (e.g., language).
4. Touch Speech rate and select the speed at which text is spoken.
To listen to an example of speech synthesis based on the current settings select Listen to an example.

Adjusting the Sensitivity and Speed of the Touch Panel Response

1. Touch All Apps
2. Use the slider adjustment to change the sensitivity and speed of the touch screen response to your finger swipe.
Backup & reset
For information on performing a Factory Reset (Clean Boot), see

Honeywell Settings

Key Remapping

For information on how to change the button functions, see

Modifying the Smart Sensors

Touch Smart Sensors from the Settings
power management.
Keep awake on motion
When enabled, the terminal is prevented from entering Sleep mode (Suspend mode) when motion is detected. By
default, this option is disabled.
Wake on motion
When enabled, the terminal wakes from Sleep mode (Suspend mode) when motion is detected. By default, this option
is disabled.
Face down suspend
When enabled, the terminal enters Sleep mode (Suspend mode) when placed face down on a flat surface. By default,
this option is disabled.

Changing the Battery LED Functionality

See
Understanding and Changing the Battery Charge Status LED Indicator

Viewing the Battery Health

See
Checking the Battery Health

Activating the Logger

You can activate a logging service that creates an Android logcat log and kernel log for APP and system trouble shooting.
Select the ON/OFF toggle box to turn the logger
> Settings
> Language & input > Text-to-speech output.
> Settings
> Language & input > Pointer Speed.
screen to configure the integrated motion detection sensors for advanced
on page 2-11.
Resetting the Terminal
Remap a Button Function
on page 2-10.
or
.
on page
1-13.
on page
1-10.
5 - 7

Advertisement

Table of Contents
loading

Table of Contents