Chapter 7 - Working With Bluetooth And Nfc Technology; Bluetooth Technology; Turning The Bluetooth Radio On Or Off; Pairing And Trusted Devices - Honeywell Dolphin 75E User Manual

Hide thumbs Also See for Dolphin 75E:
Table of Contents

Advertisement

7
Working with Bluetooth and NFC Technology

Bluetooth Technology

Bluetooth is a short-range wireless communications technology used to exchanged data between devices over a distance of
approximately 26.2 feet (8 meters). Windows 10 IoT Mobile Enterprise supports both Bluetooth™ 2.1 and 4.0 wireless
communication technology.

Turning the Bluetooth Radio On or Off

Before you can connect or pair your terminal to another device using Bluetooth technology, you must first turn on the
Bluetooth radio.
1. In the Apps list, touch Settings
2. Select Bluetooth, and then turn the Status to On
Once the Bluetooth radio is activated, the terminal automatically starts searching for discoverable devices. When a
device is found in range, it appears on the screen. The terminal also becomes discoverable to other nearby devices with
Bluetooth technology as long as the Bluetooth settings screen is displayed.

Pairing and Trusted Devices

The terminal supports pairing with other devices using Bluetooth technology. Pairing happens during general connection
setup. Paired devices are "trusted" devices. This means that there is unrestricted access to all services (including services
that require authorization and authentication).

Connecting to Other Bluetooth Devices

To connect to other Bluetooth devices, you need to perform a device search, select a discovered device, and then connect
to the selected device. Pairing happens as part of the connection process. After paired with a device, the terminal
automatically connects whenever the device is in range, if the Bluetooth radio is turned On
locked or in sleep mode.
1. Make sure the Bluetooth device you are attempting to connect to is in range and set to be discoverable by other devices
using Bluetooth technology. Both the terminal and device must be active (not locked or in sleep mode).
2. In the Apps list, touch Settings
3. Verify the Bluetooth radio Status is On
4. Touch on the name of the device you want to pair with the 75e. As the Bluetooth radio attempts to connect with the
device, "pairing" appears under the name.
5. If the device requires a pin, do one of the following:
• Compare the pin displayed on both the terminal and other device in the Pairing accessory message box. If they match,
select OK.
• Enter the pin for the device and then select Done.
6. When the devices are paired successfully, "paired" appears under the device name.
Note: When attempting to connect to a printer or headset with Bluetooth capabilities, the pin may default to either 1234 or
0000. If there is no default, consult the device literature for the number.

Disconnecting Paired Bluetooth Devices

1. In the Apps list, touch Settings
2. Touch and hold the name of the paired device, and then select Delete.
> Devices
.
> Devices > Bluetooth.
.
> Devices > Bluetooth.
, and the terminal is not
7 - 1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dolphin 70e

Table of Contents