Using The File Browser Power Tool On The Terminal; Enabling Or Disabling File Auto Install - Honeywell Dolphin 75e User Manual

If a USB connection does not automatically establish:
a. Touch All Apps
b. Touch More , and then USB computer connection.
c. Select either Connected as a media device (MTP) or Camera (PTP). Your selection is stored as the default but is easy
to change by accessing the Notification panel. Swipe down from the Status/Notification bar at the top of the screen to
view USB connection details and change the type.
4. Depending on the Windows operating system either open File Explorer or Windows Explorer.
5. Under Computer, click on D75E.
6. You can now copy, delete and/or move files or folders between the computer and the terminal or the microSD card installed
in the terminal as you would with any other storage drive (e.g., cut and paste or drag and drop).
Note: When you connect as a Camera (PTP) only the DCIM and Pictures Folders from the Internal Storage show in File Explorer
or Windows Explorer.
The Dolphin 75e should only be connected via its microUSB connector to CTIA certified adapters, products that bear the USB-
IF logo or products that have completed, the USB-IF compliance program.

Using the File Browser Power Tool on the Terminal

File Browser provides a graphical utility to browse the files stored on the terminal and the microSD card.
1. Touch All Apps > Power Tools
2. Touch a folder name or file name to open the folder or file.
Note: Due to system permissions, some files cannot be opened. Depending on the associated application(s), a choice of
applications may be available to open the file.
Press the Menu button

Enabling or Disabling File Auto Install

AutoInstall is enabled by default. When AutoInstall is enabled, during the power up boot or reboot process, the following folders
are searched for zip files containing applications.
• \Internal storage\honeywell\autoinstall on the terminal
• \IPSM card\ Honeywell\Autotinstall on the terminal
• \honeywell\autoinstall on a microSD card if installed in the terminal
Each zip file found is then compared to the applications already installed on the Dolphin terminal and:
• If the application is not installed, AutoInstall installs the application.
• If the application is already installed, AutoInstall checks to see if the zip file contains a newer version of the application,
and then installs the newer version.
• If the application is already installed and there is not a newer version, AutoInstall ignores the installation file.
When AutoInstall is not enabled, the contents of the Honeywell\Autoinstall folders on the terminal and on the SD card (if
installed) are ignored.
To disable AutoInstall:
1. Touch All Apps > AutoInstall Settings
2. Remove the check from the Enable AutoInstall box to disable the option.
1 - 14
> Settings > Storage.
> File Browser
and select Home to return to the root folder or Close to exit the File Browser.
.
.