Adding A Scanning Profile; Using The Scan Demo To Decode A Bar Code - Honeywell Dolphin 75e User Manual

Adding a Scanning Profile

To create a scan setting profile for a custom app on the terminal:
1. Touch All Apps
2. Touch the plus sign (+) in the upper right corner of the App Profiles screen.
3. Select the custom app from the Target App list. The profile appears on the App Profiles screen list. You can now select
and modify the scan settings of the new profile.

Using the Scan Demo to Decode a Bar Code

The Scan Demo demonstrates the functionality of the integrated scan image engine in the terminal and is not intended as a
functional business solution. Detailed information on how to create custom applications for your Dolphin terminal is
provided in the Software Development Kit (SDK), available for download at www.honeywellaidc.com.
1. Touch All Apps
2. Point the Dolphin terminal at the bar code. For optimum performance, avoid
reflections by scanning the bar code at a slight angle.
3. Touch and hold Scan or press and hold the Scan button. Center the aiming beam
over the bar code; see
Note: By default, the left and right side buttons also trigger the scan/imager.
4. The bar code is decoded and the results appear on the screen.
Decode Results
Touch the dots or swipe left or
right to scroll through the
decode results of past scans.
Automatic Scanning
Enable Automatic scanning mode to activate the imager for continuous scanning without requiring the operator to
touch Scan for each bar code presented in the field of view of the imager. To configure the time interval between scan
attempts, see Auto Scan Delay under
3 - 6
> Settings > Scanning.
> Demos > Scan Demo
Aiming Beam on page 3-8..
Configuring the Scan Demo Application
to open the Scan Demo application.
(page 3-7).
Scan Statistics
See Configuring the Scan Demo
Application on page 3-7.