Status Scroll Delay; Stuttered Dial Tone; Switch Ui Focus To Ringing Line; Xml Beep Support - Mitel 6863i User Manual

Additional Features

Status Scroll Delay

Your System Administrator can specify a scroll delay option that allows you to set the time delay, in seconds, between the
scrolling of each status message on the phone. The default time is 5 seconds for each message to display before scrolling
to the next message. This time can be increased or decreased as required.

Stuttered Dial Tone

Your System Administrator can enable or disable the playing of a stuttered dial tone when there is a message waiting on
the IP phone.

Switch UI Focus to Ringing Line

Your System Administrator can configure a feature on the 6863i that controls the behavior of the phone when it receives
an incoming call when it is already in a connected call. When a call comes into the phone, and the phone is already on a
connected call, the phone switches focus to the ringing line to enable you to see who is calling. Your System Administrator
can turn off this functionality so that the phone stays focused on the connected call.

XML Beep Support

Your System Administrator can enable or disable a beep to be audible when the phone receives an XML application. If this
feature is disabled, then no beep is heard when the XML application arrives to the phone.
41
6863i User Guide for Clearspan – 2895-001 – October 2014