Status Scroll Delay - Mitel 6800i Series Administrator's Manual

Operational Features

Status Scroll Delay

The IP phones have a feature that allows you to specify the time delay, in seconds, between the scrolling of each status
message (including XML status messages) on the phone. The default time is 5 seconds for each message to display
before scrolling to the next message. You can configure this option via the configuration files or the Mitel Web UI.
Reference
For more information about configuring the status scroll delay for XML status messages, see
on page 5-201.
Configuring Status Scroll Delay
Use the following procedures to configure Status Scroll Delay.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Mitel Web UI
1. Click on Basic Settings->Preferences->General.
2. In the "Status Scroll Delay (seconds)" field, enter a value, in seconds, that each XML status message displays on the phone. Default is 5 sec-
onds. Valid values are 1 to 25.
3. Click Save Settings to save your changes.
5-61
"XML Customized Services"
"XML Settings" on page A-129.
41-001561-00 REV00 – 10.2014