Mitel 6863i User Manual page 21

The ring tone default is set to US. The country-specific tone is heard on the phone for the following:
• Dial tone
• Secondary dial tone
• Ring tone
• Busy tone
• Congestion tones
• Call waiting tone
• Ring cadence pattern
Use the following procedures to configure ring tones and tone sets on the IP phone.
1. Press on the phone to enter the Options list.
2. Select Preferences.
3. Select Tones.
4. Select Ring Tone.
5. Select the type of ring tone (Tone 1 through Tone 5, or Silent).
key or select 4Set.
6. Press the
7. Select Tone Set.
8. Select the country for which you want to apply the tone set.
key or select 4Set.
9. Press the
The ring tone and tone set you select is immediately applied to the IP phone.
Contrast Level
The Contrast Level option on the IP phone allows you to set the amount of contrast on the LCD display.
1. Press on the phone to enter the Options list.
2. Select Preferences.
3. Select Display.
4. Select Contrast Level.
Use the 3 and 4 navigation keys to increase or decrease the amount of contrast on the screen.
5.
key or 4Select to save your selection.
6. Press the
Speed Dial Edit
You can use the Options menu to set speed dial edits. For more information, refer to
Live Dialpad
The Live Dialpad option on the IP phone turns the live dialpad mode on or off. With the live dialpad feature enabled, the
6863i IP phone automatically dials out and turns on handsfree mode as soon as a dialpad/keypad key or programmable
key is pressed. With live dialpad disabled, if you dial a number while the phone is on-hook, lifting the receiver or pressing
the initiates a call to that number.
Note:
Availability of this feature is dependent on your phone system or service provider.
6863i User Guide for Clearspan – 2895-001 – October 2014
Options Menu
"Speeddial Key" on page 30.
15