Port Config - TP-Link JetStream T1600G-28TS User Manual

Authentication Config

Quiet:
Quiet Period:
Retry Times:
Supplicant Timeout:
Server Timeout:

13.5.2 Port Config

On this page, you can configure the 802.1X features for the ports basing on the actual network.
Choose the menu Network Security→802.1X→Port Config to load the following page.
The following entries are displayed on this screen:
Port Config

Select:
Port:
Status:
Enable/Disable the Quiet timer.
Specify a value for Quiet Period. Once the supplicant failed
to the 802.1X Authentication, then the switch will not
respond to the authentication request from the same
supplicant during the Quiet Period.
Specify the maximum transfer times of the repeated
authentication request.
Specify the maximum time for the switch to wait for the
response from supplicant before resending a request to
the supplicant.
Specify the maximum time for the switch to wait for the
response from authentication server before resending a
request to the authentication server.
Figure 13-22 Port Config
Select your desired port for configuration. It is multi-optional.
Displays the port number.
Select Enable/Disable the 802.1X authentication feature for the
port.
212