TP-Link JetStream T1600G-28TS User Manual page 13

Chapter
Chapter 10 QoS
Chapter 11 PoE
Chapter 12 ACL
Chapter 13 Network Security
Chapter 14 SNMP
Introduction
This module is used to configure QoS function to provide
different quality of service for various network applications and
requirements. Here mainly introduces:
DiffServ: Configure priorities, port priority, 802.1P priority and
•
DSCP priority.
Bandwidth Control: Configure rate limit feature to control the
•
traffic rate on each port; configure storm control feature to
filter broadcast, multicast and UL frame in the network.
Voice VLAN: Configure voice VLAN to transmit voice data
•
stream within the specified VLAN so as to ensure the
transmission priority of voice data stream and voice quality.
This module is used to configure the PoE function for the switch
to supply power for PD devices. Here mainly introduces:
PoE Config: Configure PoE function globally.
•
PoE Time-Range: Configure the effective time for PoE port to
•
supply power.
This module is used to configure match rules and process
policies of packets to filter packets in order to control the access
of the illegal users to the network. Here mainly introduces:
ACL Config: ACL rules.
•
Policy Config: Configure operation policies.
•
ACL Binding: Bind the ACL to a port/VLAN to take its effect on
•
a specific port/VLAN.
Policy Binding: Bind the policy to a port/VLAN to take its
•
effect on a specific port/VLAN.
This module is used to configure the protection measures for the
network security. Here mainly introduces:
IP-MAC Binding: Bind the IP address, MAC address, VLAN
•
ID and the connected Port number of the Host together.
DHCP Snooping: Monitor the process of the host and record
•
related information.
ARP Inspection: Configure ARP inspection feature to prevent
•
the network from ARP attacks.
DoS Defend: Configure DoS defend feature to prevent DoS
•
attack.
802.1X: Configure common access control mechanism for
•
LAN ports to solve mainly authentication and security
problems.
This module is used to configure SNMP function to provide a
management frame to monitor and maintain the network
devices. Here mainly introduces:
SNMP Config: Configure global settings of SNMP function.
•
Notification: Configure
•
management station to monitor and process the events.
RMON: Configure RMON function to monitor network more
•
efficiently.
4
notification function for the