System Reboot; System Reset - TP-Link JetStream T1600G-28TS User Manual

is not checked, the uploaded firmware file will take place of the Backup Image. To start with the
uploaded firmware, you should exchange the Next Startup Image and Backup Image in
Config and reboot the switch.
Note:
1. Upgrading the firmware will only upgrade the backup image.
2. You are suggested to backup the configuration before upgrading.
3. Please select the proper software version matching with your hardware to upgrade.
4. To avoid damage, please don't turn off the device while upgrading.

4.3.5 System Reboot

On this page you can reboot the switch and return to the login page. Please save the current
configuration before rebooting to avoid losing the configuration unsaved.
Choose the menu System→System Tools→System Reboot to load the following page.
Note:
To avoid damage, please don't turn off the device while rebooting.

4.3.6 System Reset

On this page you can reset the switch to the default. All the settings will be cleared after the switch
is reset.
Choose the menu System→System Tools→System Reset to load the following page.
Note:
After the system is reset, the switch will be reset to the default and all the settings will be cleared.
Figure 4-16 System Reboot
Figure 4-17 System Reset
33
Boot