TP-Link JetStream T1600G-28TS User Manual page 220

Choose the menu Network Security→802.1X→Global Config to load the following page.
The following entries are displayed on this screen:
Global Config

802.1X:
Auth Method:
Handshake:
Guest VLAN:
Guest VLAN ID:
Figure 13-21 Global Config
Enable/Disable the 802.1X function.
Select the Authentication Method from the pull-down list.
 EAP: IEEE 802.1X
extensible authentication protocol (EAP) to exchange
information between the switch and the client. The EAP
protocol packets with authentication data can be
encapsulated in the advanced protocol (such as
RADIUS) packets to be transmitted to the authentication
server.
 PAP:
IEEE 802.1X
extensible authentication protocol (EAP) to exchange
information between the switch and the client. The
transmission of EAP packets is terminated at the switch
and the EAP packets are converted to the other protocol
(such as RADIUS) packets for transmission.
Enable/Disable the Handshake feature. The Handshake
feature is used to detect the connection status of the
TP-LINK 802.1X Client with the switch. Please disable
Handshake feature if you are using other client software
instead of TP-LINK 802.1X Client.
Enable/Disable the Guest VLAN feature.
Enter your desired VLAN ID to enable the Guest VLAN
feature. The supplicants in the Guest VLAN can access the
specified network source.
211
authentication system
authentication system
uses
uses