TP-Link JetStream T1600G-28TS User Manual page 112

Step Operation
3 Configure the region name and
the revision of MST region
4 Configure VLAN-to-Instance
mapping table of the MST region
5 Configure switch B as the root
bridge of Instance 1
6 Configure switch
designated bridge of Instance 2
Configure Switch C:

Step Operation
1 Configure ports
2 Enable STP function
3 Configure the region name and
the revision of MST region
4 Configure VLAN-to-Instance
mapping table of the MST region
5 Configure switch C as the root
bridge of Instance 1
6 Configure switch C as the root
bridge of Instance 2
Description
Spanning
On
Config page, configure the region as TP-LINK and
keep the default revision setting.
On Spanning
Config page, configure VLAN-to-Instance mapping
table. Map VLAN 101, 103 and 105 to Instance 1; map
VLAN 102, 104 and 106 to Instance 2.
On Spanning
Config page, configure the priority of Instance 1 to be
0.
B as the On Spanning
Config page, configure the priority of Instance 2 to be
4096.
Description
On VLAN→802.1Q VLAN→VLAN Config page,
configure the link type of the related ports as Tagged,
and add the ports to VLAN101-VLAN106. The
detailed instructions can be found in the section
802.1Q
On Spanning Tree→STP Config→STP Config
page, enable STP function and select MSTP version.
On Spanning Tree→STP Config→Port Config
page, enable MSTP function for the port.
Spanning
On
Config page, configure the region as TP-LINK and
keep the default revision setting.
On Spanning Tree→MSTP Instance→Instance
Config page, configure VLAN-to-Instance mapping
table. Map VLAN101, 103 and 105 to Instance 1; map
VLAN102, 104 and 106 to Instance 2.
On Spanning Tree→MSTP Instance→Instance
Config page, configure the priority of Instance 1 to be
4096.
On Spanning Tree→MSTP Instance→Instance
Config page, configure the priority of Instance 2 to be
0.
103
Tree→MSTP
Tree→MSTP
Tree→MSTP
Tree→MSTP
VLAN.
Tree→MSTP
Instance→Region
Instance→Instance
Instance→Instance
Instance→Instance
Instance→Region