TP-Link JetStream T1600G-28TS User Manual page 87

Network Diagram

Configuration Procedure

Configure switch A

Step Operation
1 Create VLAN10
2 Create VLAN20
3 Configure MAC
VLAN 10
4 Configure MAC
VLAN 20
5 Port Enable
Configure switch B

Step Operation
1 Create VLAN10
2 Create VLAN20
Description
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 10, owning Port 11 and Port 12, and
configure the egress rule of Port 11 as Untag.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 20, owning Port 11 and Port 12, and
configure the egress rule of Port 11 as Untag.
On VLAN→MAC VLAN→MAC VLAN page, create MAC VLAN10 with
the MAC address as 00-19-56-8A-4C-71.
On VLAN→MAC VLAN→MAC VLAN page, create MAC VLAN20 with
the MAC address as 00-19-56-82-3B-70.
Required. On the VLAN→MAC VLAN→Port Enable page, select and
enable Port 11 and Port 12 for MAC VLAN feature.
Description
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 10, owning Port 21 and Port 22, and
configure the egress rule of Port 21 as Untag.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 20, owning Port 21 and Port 22, and
configure the egress rule of Port 21 as Untag.
78